Esxcli: Difference between revisions
Jump to navigation
Jump to search
| Line 24: | Line 24: | ||
Test if you have sparse format enabled: | Test if you have sparse format enabled: | ||
esxcli system module list | grep multiextent | esxcli system module list | grep multiextent | ||
If sparse format is not enabled you get no output, if it is enabled, the output is like: | |||
# esxcli system module list | grep multiextent | |||
multiextent true true | |||
You can enable the 2GB disk format by using: | You can enable the 2GB disk format by using: | ||
esxcli system module load -m multiextent | esxcli system module load -m multiextent | ||
=== advanced settings list === | === advanced settings list === | ||
Revision as of 19:40, 26 August 2014
Disable the firewall
Disable the firewall completely.
esxcli network firewall set --enabled false
Install a patch bundle
esxcli software vib install -d /vmfs/volumes/yourvolumename/patch/patch.zip
install a vib file
esxcli software vib install -v /vmfs/volumes/yourvolumename/patch/patch.vib
enable 2GB Sparse disks
By default the 2GB Sparse disk format is disabled since -I think- ESXi version 5.x If you try to import a disk in 2GB disk format you'll get the following error:
# vmkfstools -i /vmfs/volumes/storage/myVM/myVM.vmdk -d thin myVM.vmdk Failed to open '/vmfs/volumes/storage/myVM/myVM.vmdk': The system cannot find the file specified (25).
Test if you have sparse format enabled:
esxcli system module list | grep multiextent
If sparse format is not enabled you get no output, if it is enabled, the output is like:
# esxcli system module list | grep multiextent multiextent true true
You can enable the 2GB disk format by using:
esxcli system module load -m multiextent
advanced settings list
Remind yourself of your changed system advanced settings by using:
esxcli system settings advanced list -d
from: https://twitter.com/AtherBeg/status/481743367957934080
resources
VMware Front Experience:
